2014 TOYOTA PRIUS - REPLACING FRONT BRAKE PADS & ROTORS - EASY DIY!

https://amzn.to/2L6obdd - Sil-Glyde Brake grease
https://amzn.to/3FEVcJm - GEARWRENCH 3/8" Drive Micrometer Torque Wrench 10-100 ft/lbs. - 85062
https://amzn.to/3AyXq9B - Mission Automotive Brake Caliper Hooks/Brake Caliper Hangers (Set of 2)
https://amzn.to/3mK4JGv - Milwaukee 2560-20 M12 FUEL 3/8" Extended Ratchet (Bare Tool)
https://amzn.to/3DChauZ - Bosch 50011485 QuietCast Premium Disc Brake Rotor
https://amzn.to/3mLkD3u - Bosch BC1184A QuietCast Premium Ceramic Disc Brake Pad
https://amzn.to/3DuWHYF - Genuine Toyota Parts - Pad Kit, Disc Brake (04465-47070)
https://amzn.to/3DBkAOx - Rotor Remover 9000

Just a quick video showing how to replace the front brake pads & Rotors on a 2014 Toyota Prius.
These pads were totally worn down and the brake pedal was starting to pulsate when braking at high speeds. Also, the brake pads were starting to make a little noise when braking. These new pads and rotors work great.
When I did this, I must've been sleep deprived or maybe just in a hurry because I put the abutment clips (pad retainer spring clips) in backwards. I took them back off and put them in correctly, but I wanted to mention that to make sure you don't make that same mistake that I did.

Tools Needed:
Large Screwdriver, C-Clamp, or Caliper compression tool
14mm wrench or socket
17mm open end wrench if the caliper slide pins spin when removing the caliper slide pin bolts
17mm Socket and Breaker Bar to remove the caliper bracket bolts
Torque Wrench
Brake grease

Torque spec on the caliper slide pin bolts (the ones that go into the slide pins) 25 ft. lbs.
Torque spec for the Larger Caliper bracket bolts is 101 ft. lbs.

Thanks for Watching!
Please Subscribe!
-Dan the Fix it Man

Song used in the video:
'Fleas' by Dyalla

As an Amazon Associate I earn from qualifying purchases.