TestOut Network Pro Exam 2 Study Guide Compilation (Chapters 6-7)

0:00 6.1.7 Configure a Host Firewall

You are helping Halle, a friend in college, with her network connection.



1:24 6.2.5 Configure Network Security Appliance Access

You are the security analyst for a small corporate network. You are currently using pfSense as your security appliance.
In this lab, your task is to complete the following:



2:28 6.2.6 Configure a Security Appliance

You are an IT security administrator for a small corporate network. To increase security, you have installed the pfSense security appliance on the network.



4:01 6.2.8 Configure a Perimeter Firewall

You are the security analyst for a small corporate network. You recently placed a web server in a screened subnet, or demilitarized zone (DMZ).



5:29 6.3.4 Configure a Screened Subnet (DMZ)

You are the IT administrator for a small corporate network. You want to make a web server that runs services accessible from the internet.



7:10 6.4.4 Implement Intrusion Prevention

You work as the IT security administrator for a small corporate network. In an effort to protect your network from security threats and hackers, you have added Snort to pfSense. With Snort already installed, you need to configure rules and settings and then assign Snort to the desired interface.



8:41 7.1.6 Secure a Switch

You are the IT security administrator for a small corporate network. You need to secure access to your switch, which is still configured with the default settings.
Access the switch management console through Chrome on http://192.168.0.2 with the username cisco and password cisco.



9:27 7.2.4 Configure Switch IP and VLAN - GUI
Listen to simulation instructions
After installing your Cisco switch, you would like to assign it a static IPv4 address and change the default VLAN used.



10:40 7.2.6 Create VLANs - GUI

You are the IT security administrator for a small corporate network. You need to increase the Networking Closet's security by implementing a CCTV system with IP cameras.



12:44 7.2.9 Configure Switch IP Settings - CLI

You are in the process of configuring the Branch1 switch.



15:44 7.2.10 Configure Management VLAN Settings - CLI

You just installed a new switch, and you want to manage the switch from a remote location.



18:21 7.3.4 Configure Trunking

As a network administrator, you are setting up a new switch, and you need to configure trunking. You need to secure access to your switch, which is still configured with the default settings.



20:14 7.3.6 Configure Port Aggregation

As a network administrator, you have decided to implement port aggregation and combine multiple ports on your switch to increase throughput and provide redundancy with automatic fail-over and fail-back.



21:27 7.3.8 Enable Jumbo Frame Support

As a network administrator, you have just implemented a SAN storage device on your network, and you would now like to enable your switch to handle jumbo frames.



22:23 7.3.12 Configure Port Mirroring

As a network administrator, you need to mirror (copy) all network traffic received on a particular port on your switch so you can analyze the traffic using your intrusion detection system (IDS) for any abnormalities.



23:32 7.3.14 Configure PoE

You have purchased a new Power over Ethernet (PoE) security camera and have plugged it in to port 23 on your Cisco switch. You need to make sure that this security camera has power and has critical priority on the switch.



24:19 7.4.6 Disable Switch Ports - GUI

As an important IT initiative, you are exploring opportunities to decrease the vulnerability of your network. You wish to harden your switch by disabling any unused ports.



25:30 7.4.8 Harden a Switch

You are the IT security administrator for a small corporate network. You need to increase the security on the switch in the Networking Closet.



26:57 7.4.9 Secure Access to a Switch

You are the IT security administrator for a small corporate network. You need to increase the security on the switch in the Networking Closet by restricting access management.



28:02 7.4.10 Secure Access to a Switch 2

You are the IT security administrator for a small corporate network. You need to increase the security on the switch in the Networking Closet by creating an access control list. You have been asked to prevent video game consoles from connecting to the switch.



30:48 7.5.10 Configure QoS

You are the IT administrator for a small corporate network. Several employees have complained of slow internet bandwidth. You have discovered that the user stations on the guest Wi-Fi network are consuming much of your company's bandwidth.



33:03 7.6.4 Configure NAT

You are the IT administrator for a small corporate network. One of your assignments is to manage several computers in the demilitarized zone (DMZ), or screened subnet.

*EDUCATIONAL PURPOSE ONLY/ALL RIGHTS ARE RESERVED TO TestOut Corporation® & Copyright © CompTIA*