Charger floor shifter conversion

Quick Dodge Charger floor shifter installation.

Also here is the link to write up that i read on chargerforumz.com. it also has the wiring layout in it also.

https://www.chargerforumz.com/threads...

Good luck hope all goes well.

* update*
I don't know why just didn't do this from the beginning.

Pinout.

6 pin
Pin #1 off/unlock run start to Pin#3 on the 12 pin harness
Pin #2 Ground to Pin #2 Ground on the 12 pin harness
Pin #3 Stop Lamp Relay Output to Pin # 4 on the 12 pin harness
Pin #4 blank don't use cap or tape off.
Pin#5 Can C Bus +(Positive) to Pin 5 on 12 pin harness.
Pin#6 Can C Bus -(negative)to Pin 6 on 12 pin harness.

Thank you all for viewing my video hope it helps you out.
if you get stuck please contact me thru here or at [email protected]. i will respond as quickly as i can.