How to Install Inside Mount Roman Shades

If you can hang a picture, you can hang your own custom roman window shades from SelectBlinds.com! They're one of the easiest window coverings to put up. Just follow the simple step-by-step installation instructions shown in this video and your roman blinds will be ready to roll in no time.

1. Use the two slots in the top of the headrail to position the mounting brackets. With the front of the shade facing you, center the headrail in the window and make a mark through both slots in the top of the window frame. This is where you'll place the brackets.

2. Set the shade aside. Place each bracket over your marks and using the holes in the bracket, mark where you'll insert the mounting screws.

3. Loosely drill in the mounting screws on each bracket.

4. Before drilling screws in all the way, measure between the two brackets to make sure they're aligned and even. Finish drilling in screws.

5. With front of shade facing you, use the slot holes to position the headrail over the bottom of the screws.

6. Reach up under the shade and attach the wingnuts to screws and secure headrail in window.

7. Pull shade down and up to make sure it works right.


Visit our website at https://www.selectblinds.com