How to Replace Lower Control Arm 2015-2019 Hyundai Sonata

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00962

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2015-2019 Hyundai Sonata. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata

Tools you will need:
• Pry Bar http://1aau.to/oI9/1AXAA00020
• 17mm Wrench http://1aau.to/oLN/1AXAA00010
• 19mm Wrench http://1aau.to/oLN/1AXAA00010
• 10mm Socket http://1aau.to/oaMI/1AXAA00017
• 17mm Socket http://1aau.to/oa4W/1AXAA00015
• 19mm Socket http://1aau.to/o25/1AXAA00043
• 21mm Socket http://1aau.to/o25/1AXAA00043
• Air Compressor
• Needle nose pliers http://1aau.to/ox2/1AXAA00051
• Needle nose pliers http://1aau.to/ox2/1AXAA00052
• 1/2 Inch Impact Gun http://1aau.to/onD/1AXAA00252
• Ratchet http://1aau.to/obgo/1AXAA00016
• Swivel
• Torque Wrench http://1aau.to/oam6/1AXAA00044
• Drill
• Gloves http://1aau.to/oAq/1AXSS00048
• Safety Glasses http://1aau.to/ouu/1AXAA00343
• Floor Jack http://1aau.to/oQx/1AXAA00068
• Jack Stands http://1aau.to/oLw/1AXAA00065
• Pick http://1aau.to/oEw/1AXAA00037
• Pole Jack
• Rubber Mallet http://1aau.to/ofi/1AXAA00413
• Sledge Hammer http://1aau.to/oLB/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.