How to Replace Fuel Injection Pressure Regulator 1992-1996 Toyota Camry 2.2L I4

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-199-E

This video shows you how to install a new fuel injection pressure regulator from TRQ on your 1992-1996 Toyota Camry (2.2L L4).

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 1995 Toyota Camry LE 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1992 Toyota Camry
1993 Toyota Camry
1994 Toyota Camry
1995 Toyota Camry
1996 Toyota Camry

Tools you will need:
• Pry Bar https://trq.video/oagJ-1AXAA00020
• 10mm Wrench https://trq.video/oapF-1AXAA00010
• 12mm Wrench https://trq.video/oapF-1AXAA00010
• 10mm Socket https://trq.video/obZp-1AXAA00017
• 12mm Socket https://trq.video/octZ-1AXAA00015
• Needle nose pliers https://trq.video/oK8-1AXAA00051
• Needle nose pliers https://trq.video/oK8-1AXAA00052
• Gloves https://trq.video/obFi-1AXSS00048
• Paper Towels https://trq.video/oWT-1AXSS00035
• Safety Glasses
• Drain Pan

Subscribe:    / @trq  

Check out our playlist:
Toyota Camry 1992-1996:    • Toyota Camry 1992-1996  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.