How to Replace Front Strut & Spring Assemblies 2013-2019 Ford Escape

Buy Now!
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ib-1ASTS01516

This video shows you how to install new front strut & spring assemblies from TRQ on your 2013-2019 Ford Escape. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

Estimated installation time for a professional technician is approximately: 1 hour 36 minutes

This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape

Tools you will need:
• Pry Bar https://trq.video/oaeG-1AXAA00020
• 15mm Wrench https://trq.video/oamd-1AXAA00010
• 17mm Wrench https://trq.video/oamd-1AXAA00010
• 13mm Socket https://trq.video/oco8-1AXAA00015
• 14mm Socket https://trq.video/oco8-1AXAA00015
• 15mm Socket https://trq.video/oco8-1AXAA00015
• 18mm Socket
• 19mm Socket
• 32mm Socket https://trq.video/oeN-1AAST00003
• 8mm Socket https://trq.video/obVk-1AXAA00017
• Brake Caliper Hanger https://trq.video/oom-1AXAA00439
• Tie Rod Puller
• Locking Pliers https://trq.video/oqc-1AXAA00139
• T25 Torx Socket
• Ratchet https://trq.video/ocoS-1AXAA00016
• Socket Extensions https://trq.video/oco8-1AXAA00015
• Torque Wrench https://trq.video/obqu-1AXAA00044
• Gloves https://trq.video/obxk-1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack https://trq.video/oaJx-1AXAA00068
• Jack Stands https://trq.video/oavP-1AXAA00065
• Pick https://trq.video/o9z-1AXAA00037
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Escape 3rd Generation 2013-2019:    • Ford Escape 3rd Generation 2013-2019  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.