Dividing attachment for the Mini Lathe - For making scales on the Lathe

For my last project I quickly improvised a cardboard dividing plate for the Mini Lathe. This thing wasn't very rigid at all. It wobbled and went loose over time in the lathe spindle.
As I have to make further scales for the mini lathe in the future I decided to make a more rigid and reliable attachment for dividing on the lathe. I used a 4mm plate of aluminium with a diameter of 200mm and a bar of POM plastic for the arbor. A steel core with a taper expands the arbor when tightened and clamps it securely in the lathes spindle.
Off course this method of dividing isn't super accurate. But if you have no other options this is simple to build and to install on the machine.

I hope you enjoy this little episode. If you have questions or suggestions, please let me know in the comments. I'll read them all and try to reply to everyone.
I hope you enjoy this video. Feel free to comment, like and subscribe to the channel.
Thank you!

00:00 Intro
00:20 The old dividing plate
01:03 Materials needed
01:23 Making the aluminium plate
02:48 Making the arbor
05:03 Making the steel inner part
06:38 Finishing the arbor
08:23 Drawing the scale
09:05 Completing the attachment
10:02 Installing on the lathe

Instagram page:   / wecandothat.  .

Keep in mind, due to very limited resources, I have to improvise a lot and go unconvenient ways which may upset some of the "real machinists" out here. Hope - with some creativity - in the end come to good resoults anyway.

-Making a dial for Mini Lathes carriage:    • Making a dial for the Mini Lathes car...  
- Adjustable Carriage Stop: https://www.youtube.com/watch?v=EpWPT...
- Mini Lathe compound angle modification: https://www.youtube.com/watch?v=rdkoT...
- Mini Lathe tailstock fine adjustements:    • Mini Lathe tailstock modification par...  -
- Mini Lathe bearings for the compound slide:    • Bearings for the mini lathes compound...