Скачать или смотреть How to Send Custom Sensor Data | Meshtastic for Makers

🔗 The full written course : https://core-electronics.com.au/cours...

▶ The YouTube Playlist :    • Meshtastic for Makers  

In this video of our Meshtastic for Makers course, we are going to be looking at how we can send our own sensor data (or whatever information you really want), from a microcontroller to the Meshtastic network. To do so we will be looking at how to set up the serial module, and how to set up a 2nd microcontroller to use that serial connection in MicroPython.

🔄*Need a Thonny Refresher?* :    • Thonny, Installing MicroPython & Hello Wor...  

🔧🔨🧰 Hardware featured in this guide:
Pico H:
https://core-electronics.com.au/catal...
LoRa Module:
https://core-electronics.com.au/catal...
2.4 Inch OLED:
https://core-electronics.com.au/catal...
Header Stacker:
https://core-electronics.com.au/catal...

💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: http://coreelec.io/forum

0:00 What We Are Doing
2:08 Setting up the Serial Module
3:45 Hardware Assembly
5:10 Code Along UART Test Message
7:20 Sending Sensor Data

🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspb...
• Arduino https://core-electronics.com.au/ardui...
• Sparkfun https://core-electronics.com.au/brand...
• Adafruit https://core-electronics.com.au/brand...
• Pololu https://core-electronics.com.au/brand...
• DFRobot https://core-electronics.com.au/brand...

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo