Скачать или смотреть KG Gunkote Test Run

Testing out some of the procedure of coating a firearm / magazine / metal In KG GunKote. I used aircraft paint stripper, steel wool, and a steel brush to remove the outside factory coating of an H&K steel magazine(it took a lot of work to remove). I ended up sandblasting the mag as well just to practice with the sand blaster. After the finish was removed I de-greased the mag and preheated it to about 120 degrees Fahrenheit. I then applied KG K-Phos via airbrush and reheated. I then applied Foliage Green KG GunKote via airbrush and baked for one hour and twenty minutes at 325 degrees Fahrenheit. Everything turned out pretty great for my first go at it. The coating is a little thin at spots but I think it will hold up just fine. Stay tuned for a full How To video on KG GunKote