SD2IEC Internal C64 PCB pinheader mod (for 250466 and 250425)

Looking through options other than the suggested soldering points on the serial bus connector as given by the SD2IEC website.. I found a row of via holes that made perfect for a 4 contact pinlist.
This is a soldering video and it is a bit long. Hope you enjoy.

Edit 2016-04-25, add a male pinheader to the board and a female header to the wire. In that way, if the wire comes loose the female header will insulate. My solution here might short something out if my wire with male pin header comes loose.

In this video you will also hear the SID chip of this computer. It is hooked up to a studio soundcard (M-Audio 96kHz/32bit).

I haven't fastened the SD2IEC to the case yet. There is only one mounting hole on the board. There is a high through hole part on an otherwise smd component board making it difficult to stick it onto a surface. I guess it needs a spacer and a plastic screw.

Where i bought the SD2IEC: http://thefuturewas8bit.com
Installation: http://www.sd2iec.co.uk/id20.html
Firmware: http://sd2iec.de/
Gallery of the various C64-PCB Assy revisions: http://www.cbmhardware.de/c64/c64boar...