How to Replace Front Lower Control Arm 08-14 Cadillac CTS

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00777

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. This video shows you how to install a new quality TRQ lower control arm in your 08-14 Cadillac CTS. The procedure is the same on either side of the vehicle.

• Check here for more videos on the 2008-13 Cadillac CTS:    • Cadillac CTS 2008-2013 Second Gen  

This process should be similar on the following vehicles:
2008 Cadillac CTS
2009 Cadillac CTS
2010 Cadillac CTS
2011 Cadillac CTS
2012 Cadillac CTS
2013 Cadillac CTS
2014 Cadillac CTS
2015 Cadillac CTS

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 21mm wrench
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 22mm Socket http://1aau.to/oa/1AXAA00266
• 24mm Socket
• Pickle Fork
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/oa/1AXAA00078
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Anti-Seize Grease
• Block of Wood
• Marker / Writing Utensil
• 6mm Hex Socket
• Center Punch http://1aau.to/oa/1AXAA00055
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Rubber Mallet http://1aau.to/oa/1AXAA00413

Subscribe:    / @trq  

Check out our playlist:
Cadillac CTS 2008-2013 Second Gen:    • Cadillac CTS 2008-2013 Second Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.