On Road Powering of a CPAP Machine

This video was inspired by Power Quality concerns around taking a CPAP Machine on the Road, since these expensive medical devices work best with a clean stable power during a full night’s sleep.

Luckily modern Power Packs are now reasonably priced with Pure Sine Wave 120VAC output, mitigating these "On The Road Concerns".

In this video, we take a quick peak at unboxing the Bluetti AC70; as that Pure AC Source..

A few quick tests standard household appliances are completed before looking into Solar solutions for the road camping.

The video shows unboxing the Solar Panel chosen; and explores some interconnect issues arising; including way to double charging speed.

For our real life application, a AC70 Bluetti was used to power a CPAP machine overnight several times; then recharged from a HardKorr 200 Watt Solar Blankets.

Each test result is presented and reviewed.

The good news is that the Power Pack we chose supported 3 nights of CPAP before recharge;

A menu is provided to help you revisit any key part of the presentation, since there is a lot covered.

00:00 Introduction
00:21 Powering a CPAP Machine for the Road
01:21 Un-Boxing a Portable Power Source
02:20 Some Quick Tests
02:41 The Selected Solar Solution
03:21 CPAP Test #1
04:13 Increasing Power for Test #2
04:54 CPAP Test #2
05:28 A More Aggressive CAP Test #3
06:02 Conclusions


References:
1) https://www.bluettipower.ca/ ; for more information on the power module used
2) https://unboundsolar.com/solar-inform... ; for Sine Wave type descriptions
3) https://hardkorr.com/us/product-categ... ; for Solar Panel Information






Produced with CyberLink PowerDirector by cache4pat.
Proofed by rucache

Code: COTJVNGQWBEVNRRL