Скачать или смотреть How to install a multipoint lock into a timber door

This video runs through the process of installing a multipoint lock into a timber door.
The door handle wasn’t installed in this video as the customer was still undecided as to which one they wanted and the setting out is different between the handle ranges and I didn’t want holes where I didn’t need them. Definitely best to wait....
Here at A P Bourne we undertake all aspects of bespoke Carpentry And Joinery from a jigsaw board holder to a curved roof. Nothing is generally to much trouble for us to undertake. Should you require anything bespoke and made using timber please don’t hesitate to contact us. Our email is below..
Also have a look at what we currently have for sale on our website, you may find something of interest. Thank You
Adrian


Email
[email protected]

Website Address
https://www.apbournebespoke.co.uk/


00:00 Lay the lock on the door and transfer marks around the door.
00:06 Ensure the top and btm shoot bolts are flush..
00:09 Lock in unlocked position and mark for cutting.
00:19 Transfer marks to the front of the lock
00:21 Cut to length
00:34 Check cut
00:41 Transfer earlier marks
00:50 Install Selected cutter into selected router
01:01 Attach router jig/fence
01:11 Set cut depth
01:27 INVOLVE THE FAMILY
01:47 Rout deeper sections
02:38 Check fit and adjust if necessary
02:46 Mark out and cut the top and bottom rebates
03:28 Mark out for main lock body
04:00 Drill out for handle and eurolock
04:30 Check the lock fit
04:38 Fit and finish