Woodturning a Fantastic Bowl From a Flat Board

This is my first attempt at woodturning a bowl from a board. The inspiration for this piece was from a video by thepapa1947. For a full instructional video on this process, please watch his video. Link below to his video and channel. I tried to stick to his instructions for my first attempt and feel I was fairly successful. I used Walnut, quilted Maple, and Padauk in this piece. I’m not sure I like the idea of using Padauk next to maple as it really hinders the finishing options due to the Padauk bleeding into the Maple. I used a gloss clear lacquer on this piece to limit the color bleed. This was a fun a simple piece to make that required a few special setups. I really enjoyed making this project and now that I feel confident in the technique, I will likely adapt it to try some different designs in the future. I had some successes and failures in this video. I tried and failed to keep the first ring from bouncing around on the lathe when cut. It was a bit of a rushed idea and I’ll come up with something better next time. I also definitely need to get a smaller parting tool. The one I used is a 3/16”x1/2” wide and burned the wood a little when cutting. I tried to modify it after cutting the outer ring and it seemed to work better but I think a smaller cutting tip would be ideal. Maybe a 1/8 inch tool would work better. Thank you to my friend Matt for welding me up that stainless steel tool rest for making the angled cuts. It might not be a pretty weld but it did exactly what I needed it to do. Thanks for watching, I hope you have a great day!

Thank you to @thepapa1947 for all the inspirational and instructional videos. His
Chaos bowl instructional video can be found here.
   • Wood Turning Planned Chaos at the Ban...  

And his channel
   / @thepapa1947  

Product links
Affiliate links are used when possible and I may receive a small commision

Simple woodturning tools
https://www.simplewoodturningtools.com?bg_ref=gkr80FMJN5

Acrylic Resin Roughing, Turning, Simple Scraper Set of 3
(These 3 tools are my go to favorites, you will not be disapointed!) https://www.simplewoodturningtools.co...

Simple hollowing system with laser kit
https://www.simplewoodturningtools.co...

Gloss lacquer spray-https://amzn.to/3VJUZ0D (amazon)

Yorkshire original abrasive paste- https://amzn.to/3VpJVWf (amazon)

Yorkshire microfine abrasive paste- https://amzn.to/3Vr3Aot (amazon)

#woodturning #woodworking #diy
Music courtesy of epidemic sound