The Pace 7040 Hydraulic Valve with Joystick is the OEM part used with the smaller Koyker loader models. The kit includes the valve itself, the rubber boot (installed), the joystick (not installed), and the power beyond sleeve and plug (not installed). Instructions for installing the hoses are also included in the kit.
This is a dinoil valve. It has two spools that raise and lower the loader, and curl and dump the bucket. The valve's working pressure is 3000 PSI. Its flow capacity is 13 GPM. This hydraulic valve ships open center but comes with the power beyond sleeve and plug, which can be added to make the valve work with any hydraulic setup: open center, closed center, and power beyond (PBY). The float function is on the first spool. When shifting from neutral, the check valves prevent it from reversing. The relief valve is adjustable from 1450-3000 PSI. The inlet ports are 3/4" 16 (SAE #8). The outlet ports are 7/8" 14 (SAE #10). The PBY port is 3/4" - 16 threads (SAE #8). The joystick and rubber boot are included in the kit.
This valve and joystick kit fits Koyker loader models 50, 80, K1, 100, 110, 125, 140, 145, 150, 155, 160, 165, 175, 180, 185, 190, 195, K2, 200, 210, 220, 235, 245, 310, 315, and 345. It is used on tractors that do not have a cab.
This hydraulic control valve setup can also be used with any brand loader on a tractor that has lower than 80 hp. The tractor brands it works on, for tractors under 80 hp, are: AG KING, AGCO, AGCO-ALLIS, AGCO-WHITE, AGRACAT, AGTRAC, ALLIED, ALLIS CHALMERS, BELARUS, BENYE, BRANSON, Case-IH, Farmall, CENTURY, CUB CADET, CUB CADET/YANMAR, DAVID BROWN, DEUTZ, DEUTZ-ALLIS, DEUTZ-FAHR, DONG FENG, DRAGON, EICHER, EMERYBUILT, FARMPRO, FARM SYSTEM, FORD/NEW HOLLAND, FOTON, FUTIAN, HARDY DIESEL, HINOMOTO, HURLIMANN, INTERNATIONAL, IRON HORSE, ISEKI, JINMA, JOHN DEERE, KAMA, KIOTI, KODIAK, KUBOTA, LENAR, LONG, Farmtrac, Landtrac, LYNTRAC, MAHINDRA, MASSEY FERGUSON, McCORMICK, MEMO, MILLENNIUM, MITSUBISHI, MONTANA, NEW HOLLAND, Workmaster, NORTRAC, OLIVER, RHINO, RINGO, RINGO STAR, S.A.M.E., SCORPION, SHAKTI, SHENNIU, SHIBAURA, SHANGHAI / NEW HOLLAND, STALLION, SWARAJ, TAFE, TASK MASTER, TERRA CYCLONE, TERRAPLANE, TIGER, TRACTOR KING, TYM, WHEEL OX, WOODY, YANMAR, YTO, ZETOR.
These are the specs of the valve: The valve is a 2-spool dinoil valve. One spool controls the lift and lower of the loader's boom arms; the other spool controls the curl and dump functions. The valve has a working pressure of 3000 PSI. It has a flow capacity of 13 GPM. The valve is shipped open center, but the power beyond sleeve and closed center plug are included (not installed) in the package. This enables you to make the valve work with an open center, closed center, or power beyond hydraulic setup. A float function is included with the first spool. Check valves prevent reversing when shifting from neutral. There is a relief valve which is adjustable from 1450 through 3000 PSI. The valve comes with the rubber boot installed over the joystick joints. The joystick is included in the package. The inlet ports are 3/4" 16 (SAE #8). The outlet ports are 7/8" 14 (SAE #10). The PBY port is 3/4" - 16 threads (SAE #8).
The 4 ports that control the loader and bucket are located in the middle of the side of the valve. The top two ports control the lift and lower functions of the loader. The bottom two ports control the retract and dump functions of the bucket.
The very top port located on the valve's side is for the pressure out (to the tank).
There is also a port on the bottom side of the valve. This port is for the pressure in.
The port located on the top side of the valve will be used differently depending on the tractor's hydraulic setup. If your tractor has open center hydraulics, install JUST the plug (not the sleeve) in the top port. If your tractor has
The kit can be purchased here: http://www.shortlineparts.com/koyker-...
Rebuild kit o-ring seals for Koyker control valve can be purchased here:
http://www.shortlineparts.com/koyker-...
Информация по комментариям в разработке