I have a Miele dishwasher Model g2220-sc1. It shows code f14 I

From https://www.justanswer.com/ythi
JustAnswer Customer: I have a Miele dishwasher Model g2220-sc1.
JustAnswer Customer: It shows code f14 I use Sensor wash.
JustAnswer Customer: It seemed to stop after filling.
JustAnswer Customer: I tried Quick wash but after it went from 24 to 22 mins the same f14 came up?
JustAnswer Customer: Do I need to call service?
Tyler Z.: Home Appliance Technician: Hello, and thank you for using this service.
Tyler Z.: Home Appliance Technician: I'll be helping you with your problem today.
Tyler Z.: Home Appliance Technician: So there are quite a few things that can cause the dishwasher to come up with an F14 error code.
Tyler Z.: Home Appliance Technician: The first thing you want to do is start a cycle and as soon as the F14 error appears, open the door and look at the water level inside the dishwasher.
Tyler Z.: Home Appliance Technician: How high is the water compared to the bottom of the filter handle below the bottom dish rack?
JACUSTOMER-3yo9npcf-: Appliance Technician: Hi Tyler, The water level is almost touching the bottom of the filter handle
Tyler Z.: Home Appliance Technician: OK so that's perfect.
Tyler Z.: Home Appliance Technician: That exactly where it should be.
Tyler Z.: Home Appliance Technician: So let me explain the error code.
Tyler Z.: Home Appliance Technician: F14 means that the heater pressure switch isn't being activated.
Tyler Z.: Home Appliance Technician: This switch is activated when the circulation pump forces water through the intake tunnel and heater when the dishwasher should be washing.
Tyler Z.: Home Appliance Technician: If the water level was too low, then the switch wouldn't be activates because the dishwasher wouldn't have enough pressure to push the switch down.
Tyler Z.: Home Appliance Technician: Now that we've verified that the water level is good, that means that either your switch is bad, or the circulation pump is bad and not running.
Tyler Z.: Home Appliance Technician: If water never sprays around inside the washer after it fills, you need to replace the circulation pump.
Tyler Z.: Home Appliance Technician: If the dishwasher sprays water for 30 seconds or so before it shuts off and give the F14 error, you need to replace the heater pressure switch.
Tyler Z.: Home Appliance Technician: Both parts will require you to un-install the entire dishwasher and tip it on it's back to remove the panel below the dishwasher so that you can access the parts for replacement.
Tyler Z.: Home Appliance Technician: If you have any other questions, please ask me – I’ll be happy to respond.
Tyler Z.: Home Appliance Technician: You can continue asking follow-up questions until you have all the information you need even after rating my service.
Tyler Z.: Home Appliance Technician: Thank you!
Pearl Wilson: Assistant: If you have a home improvement or appliance question and want to chat with an expert now visit justanswer.com/ythi