Firefly Super FFST FR Blue Burst Finish

Deep Dive Review of the Firefly Super FFST with FR bridge

2:07, Music Introduction
2:50, Unboxing the Guitar
7:47, Fit and Finish and the Cosmetics
33:23, Factory Setup Neck Relief
33:49, Factory Spec Neck Radius
37:29, Factory Setup Fret Rocking Time
40:23, Looking at the finish on the frets
42:53, Factory Setup Intonation / First fretted Noted / Locking Nut
59:06, Weight of the Guitar
59:39, Pickup Readings
1:00:43, Looking at the route and the tremolo parts ( Claw / Springs / Block / Screws )
1:04:23, Looking at the electronics and the routing ( Cover Plate / Pots / Wiring )
1:12:07, Factory Setup Action Height / Fret Height
1:15:23, Removing the factory strings
1:17:44, Removing the tremolo system and reviewing the tremolo's QC
1:22:39, Removing the neck from the body of the guitar
1:24:05, First look at the neck pocket and neck seat
1:25:10, Reviewing the neck pocket route and bore holes for the neck screws
1:29:12, Measurement Specs on the back route pockets ( for the MODDERS )
1:32:37, Removing the pickup @and the bridge and looking at the route
1:33:36, Measurement Specs on the Routes for the Pickups / Upper Tremolo
1:35:56, Measurement Specs on the tremolo posts
1:36:23, Measurement Specs on the neck pocket
1:36:53, Removing the pickup @and the neck and looking at the route
1:39:11, Check a Stock FR bridge for fit
1:41:16, Measurement Specs on the neck.
1:43:43, Intermission ...... and the SMASH THE LIKE BUTTON
1:44:38, Chat before DEMO... Problems with the locking nut /tremolo base plate
1:47:28, DEMO TIME using a Blackstar modeling amp
1:49:14, Problems found in the DEMO with the frets
1:51:37, Chat about the fret problem... and what I did to fix it for the demo
1:53:12, DEMO TIME AGAIN ! using the Blackstar modeling amp
1:57:56, DEMO TIME using a Line 6 HX Stomp
2:11:32 Final Thoughts and Overview of the Instrument
2:23:43 Out Takes . . . LOL


Some of the tools I use to check Guitars.
Fret Rocker / Sanding Beam / Neck Gage 24.75/25.5 (3 tool kit)
"https://www.amazon.com/Fret-Leveling-..."
StewMac Radius Gage Set
"https://www.amazon.com/StewMac-Unders..."
JIS #2 #3 Cross Screw Drivers
"https://www.amazon.com/dp/B07ZK6V1GQ/..."
StewMac Action Height Gage
"https://www.amazon.com/StewMac-String..."