https://www.ashindustries.com/youtube
Are you trying to figure out the best process for you project? ASH Industries can help you find the best machining for your product through Design for Manufacturing (DFM). If you're looking for tight tolerances, CNC Swiss Machining might be for you. Metal or Plastic it doesn't matter, we can do both!
https://www.ashindustries.com/youtube
Every process has its pros and cons. Here's a look at the advantages of ASH™ Swiss machining with a 7-axis CNC:
Efficiency: Swiss lathes are somewhat compact machines, so cutting operations take place quickly. Tool switch is done quickly and chip to chip time is often very fast too, allowing parts to be made faster. What's more is that such machines can be programmed to work autonomously, so they can produce parts at night or without 24/7 supervision.
Part Quality: Post fabrication finishing is often unnecessary when parts are created via Swiss lathes and 7-axis CNC machining. That's because the surface finish is of such quality immediately after part fabrication that no secondary finishing is necessary. The precision of such machines also allows extremely detailed parts to be fabricated.
Tooling: Many Swiss lathes can contain up to 20 different tools, which help create the part and also assist machinists in the first two advantage points that we listed here. Many lathes also come with rear sub spindles, which exist in the back of the machine and work away at other parts of the bar stock while the main spindle does its work.
Fast Setup Times: Set up times are generally very fast via this process, which - again - helps speed part fabrication.
To find out more visit:
https://www.ashindustries.com/youtube
------------------------------------------- Contents of Video -------------------------------------------
0:22 - CNC Swiss Turning - helping eliminate costs
0:48 - Design for Manufacturing
1:07 - Swiss Lathes combines tooling and additional operations at one time - cuts cost
2:15 - Our engineers can help you make the best parts
https://www.ashindustries.com/youtube
ASH® Industries is a trusted manufacturer that is dedicated to seeing you and your product succeed. We offer a complete suite of in-house manufacturing and engineering services dedicated to molding, tooling, project engineering (DFM-Design for Manufacturing), & production management (including tooling, process, and mold validation).
Made in America: ASH® is proud to do all our injection molding manufacturing in America, no outsourcing. Every point of our process is done right here in the USA, at our product manufacturing facility in Louisiana. We work with clients all over the United States and can ship products nationally and globally.
Ash Industries' Move-A-Mold™ program can help you begin production of your components within one week. If your group has existing molds and you wish to benefit from ASH’s talents, you can move your molds with absolute assurance that your needs will be given priority.
ROTO-XL™ represents ASH’s unique roto-molding division focusing on tooling & hollow thermoplastic components up to 18’ long and 52” in diameter. ROTO-XL™ molding is a cost effective alternative to injection molding for large plastic parts, components which must be hollow (such as berms, barrels, canoes, kayaks, slides), and those which may be made from commodity thermoplastics (polyethylene or polypropylene). The molds are less expensive than injection molding tooling as they do not have to be large, bulky, and built to withstand the tremendous pressures of injection molding.
MIM (metal injection molding) works similar to the other injection molding processes - powdered metal is combined with a binding material and then injected into a mold where it's left to form and curate. The end result is a metal part. The process is ideal for the short and long-run production of metal parts, especially those that are smaller in size and more detailed in terms of properties.
Silicone liquid injection molding, or LIM, is a manufacturing process commonly used to make silicone parts (considered a subset of rubber or thermoset) that need to withstand extreme conditions, regardless of the industry. The process is an injection molding process at heart, meaning that materials are injected into a pre-made mold, where heat accelerates part curing.
Ash Industries goes the extra mile when it comes to making their products. Because of their commitment to your parts they are ITAR Registered, ISO 9001:2015 Certified, and ISO Class 7 Cleanroom Certified.
🟢 Watch next: • Ash Industries Experts in Molding
#AmericanManufacturing #ContractManufacturing #ManufacturingIndustry #PartGurus #design2part #injectionmolding #rotationalmolding #MIM #Supermold
1330 W. Willow St., Lafayette, LA 70506
For more information visit:
https://www.ashindustries.com/youtube
Информация по комментариям в разработке