SoundShaker Installation Guide

SoundShaker Installation Guide

Welcome to SoundShaker. Get ready for a new revolution in home entertainment. You’ve seen it, you’ve heard it, now it’s time to FEEL it! Here’s what's included with every Soundshaker amplifier kit: A wireless transmitter, a Soundshaker amplifier with tray stand, a transducer cable, two power cords, and two RCA Y cables.

Start off by connecting the transducer cable to the SoundShaker transducer underneath your seats. This cable can connect up to four seats on a single SoundShaker amplifier kit. Connect the transducer cable to the amplifier, plug-in the power cord, and set the amplifier in the tray stand. Now, turn the volume and crossover dials to the right and set the last dial to WiFi.

Next, connect the wireless transmitter to the back of your audio receiver. Locate the RCA subwoofer out and plug-in the RCA Y cable. You can also connect your existing subwoofer and SoundShaker together by using the second RCA Y cable provided in your kit. Now, play your favorite action movie so there’s a strong audio signal. The signal should go from your audio receiver and transmitter to the SoundShaker amplifier and seats. You’re now ready to feel the difference!

If you’re not feeling the rumble from your SoundShaker, make sure all devices are turned on and have power. Check the wiring connections and turn the volume up on all devices. If you don’t have a strong audio signal you won’t be able to sync or feel your SoundShaker. If your devices are not synced, hold down the “code” button on each device separately for 5 seconds. The lights will go from flashing to solid red when synced.

Whether you’re enjoying your favorite movie with that special someone, or your entire family, make sure your home theater is “Powered by SoundShaker”!