4age - Full engine rebuild stop motion

4AGE valve cover gasket set: https://amzn.to/2OUJ7be
4AGE complete gasket kit: https://amzn.to/2qm3xQ8
4AGE main bearings: https://amzn.to/2MlAdBK
4AGE piston rings: https://amzn.to/2oFzX7R
4AGE water pump and timing belt kit: https://amzn.to/33vScv8
4AGE intake trumpets for 20v ITBS: https://amzn.to/35HVDAM
4AGE/ Toyota oil an stud kit: https://amzn.to/2OUTvzD
4AGE spark plug leads: https://amzn.to/31libnt

Here's a stop motion time lapse video of a full assembly of the Toyota 4AGE 16v engine, as found in the ae86 trueno levin corolla, toyota mr2 aw11, as well as other toyota vechicles like the corona, sprinter, carina, and even the Chevrolet Nova and Geo Prizm.

This video and engine is a product of two years of collecting parts, learning things I previously knew nothing about, saving money and then finally putting it all together.

The 4age is a sporty 1600cc 124hp (116 with cat) 4 cylinder engine with a 7600 rpm redline and is one of the best sounding 4 cylinders out there. It's a simple and reliable yet entertaining and exciting engine that loves to be revved and driven hard. By today's standards its under-powered and outdated but it still has a faithful following due to its great character. It is also what Initial D protagonist Takumi Fujiwawa has in his famous ae86.

The particular engine assembled in this video is a 4age 16v bigport from my 1987 MR2 mk1. The engine has been lightly modded with some technotoytuning adjustable cam pulleys, HKS valve springs, mild catcams camshafts (2x 7105136 exhaust cams, with 8.0mm of lift and 244 degress of duration). It also has domed 4age smallport pistons and a very mild head and block cut, leading to a final compression ratio of about 10.4:1. The block has been bored 0.5mm and oversized cast pistons and rings fitted.

This is a street build and goal was to give the engine a small increase in power and make the engine more lively and exciting, but also keep it as reliable as possible. This is why the engine has remained non-interference. The crankshaft, flywheel, clutch pressure plate, pistons and conrods have all been balanced to ensure the engine revs as smooth as possible and copes well with high-rpm.

Here's the more important stuff listed:
Crank bearings: OEM
conrod bearings: OEM
conrod bolts: ARP
Head bolts: OEM
Main cap bolts: OEM
Head gasket: OEM
Cams: Catcams 8.0 lift, 244 duration
Cam pulleys: techno toy tuning
Valve springs: HKS
Flywheel: oem blacktop
Clutch: Aisin
All gaskets: OEM


All of the parts received one or more combinations of the following: cleaning, blasting, galvanisation, painting.

A more detailed video of the assembly with torque specs, part numbers and instructions is coming soon.

Thanks for watching and don't forget to subscribe.
Also check out my blog for more entertaining content: www.driving4answers.com

Music:
Tendencies - Plastic
   • Tendencies - Plastic  

Tendencies
  / tendencies  
  / tendencies_____  
https://tendencies.bandcamp.com/
  / tendenciesof.  .
https://www.youtube.com/channel/UCwq1...
https://itunes.apple.com/ca/artist/te...

#d4a #enginerebuild #timelapse #stopmotion #4age #4age16v #aw11 #ae86 #4agebigport #mr2mk1 #mr2 #toyota #jdm #celica #corolla #starlet #ke70 #fx16

D4A (driving 4 answers) is part of the amazon associates program