How to Replace Rear Window Regulator 2007-2013 Chevrolet Silverado

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com http://1aau.to/ib/1AWRG00821

This video shows you how to install a rear window regulator on your 2007-2013 Chevrolet Silverado. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• 10mm Socket http://1aau.to/taTP/1AXAA00017
• Trim Tool Set http://1aau.to/tTM/1AXXX00006
• Wire Cutters
• Ratchet http://1aau.to/ta2a/1AXAA00016
• Torque Wrench http://1aau.to/tafQ/1AXAA00044
• Gloves http://1aau.to/twQ/1AXSS00048
• Painter's Tape
• Safety Glasses http://1aau.to/trh/1AXAA00343
• Wire Ties
• Pick http://1aau.to/tBr/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/tgy/1AXAA00280

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.