Hyundai Creta 2024 Facelift: Step by Step Installation Guide

Hey Fellow Spartan!

"🔗 Get Your Hyundai Creta 2024 Screen Guard Here! 🔗
https://tinyurl.com/BuyCreta2024TopMo...

Looking to protect your Creta 2024 screen? Click the trusted Amazon link above to purchase our top-rated screen guard! 🛒✨ Our product is tried and tested, ensuring your screen stays in its brand-new pristine condition.

🎥 Already Purchased? Watch Our Installation Guide! 🎥

✅ Step 1: Clean the screen with a wet alcohol wipe to remove dirt, smudges, and dust particles.

✅ Step 2: Wipe the screen clean with the microfiber cloth.

✅ Step 3: Use the dust-removing sticker to remove minute dust particles on the screen.

*IMPORTANT*: Take your time to spot the tiny dot-like dust particles(if any) spread across the screen and properly remove them. This requires patience but removing it is necessary to avoid bubbles.

✅ Step 4: Now, gently peel off the sticker tagged Step-1, which exposes the gummy side that will stick to your car's screen. Make sure to hold the guard from the top edges to avoid any fingerprints showing up on the sticky side.

*NOTE*: After peeling off the Sticker-1, determine the installation location on the screen to get an exact idea of where to paste it.

✅ *Step 5*: Align the screen protector along with the BOTTOM-MOST edges(curves) of your screen and then slowly apply it across the entire screen using the thrust of your fingers.

*IMPORTANT*: There's a minute gap between the screen & its panel, which allows the screen guard to get tucked inside it --- resulting in some space at the top. A little space is fine for easy fitting, but if you prefer an edge-to-edge fit, avoid letting the protector tuck into the frame.

✅ Step 6: Scrape out the excess bubbles using the complimentary Squeezee.

**IMPORTANT**: The screen has a slight bend in the middle, causing the guard to detach from the center since it adheres to the straight edges. Simply peel it off gently from one side, press down in the center for a secure fit, and then reapply the guard to the side you removed it from to ensure full coverage.

✅ Step 7: Once again, use the bubble-removal Squeezee to push out the bubbles (if any). Thereafter, gently remove the outer film by peeling off the Step-2 sticker.

✅ Step 8: Installation is Complete!

If you have any questions related to the installation process, kindly reach out to us on WhatsApp at 7973336998.