How to make a Flat bar/Round bar bender for almost free!! DIY bender fabrication!! Cheap!!!

On this episode of Mad Ginger Customs we show you how to build a Flat bar/ Round bar bender from items laying around or stuff you can get at a local hardware store! Follow along with this DIY guide to getting a bender built on the cheap! Jess gets in on this one with testing and quality control!

Dimensions are as follows:
2 1/2"x 2 1/2 "x 3/8" for the base. You can use 2"x2" really, but I use what I have!
Pins are 1/2" Round bar
Main block pin 3 1/4" long
Arm pin 2 3/4" long
Main block pin width on center 1 5/16"
Arm pin width on center 1 5/16"
Arm flat bar length 6"
Arm round bar length 30"
Arm hole from end on center 1/2"
Material totals:
1/2" round bar= 9" total
2.5" or 2", 3/8" thick flat bar= 8.5"
1" black pipe= 30"

If you like our content, you can buy us a coffee here!
https://bmc.link/madgingerc7

Arccaptain Welders
Website: https://www.arccaptain.com/?ref=7s070ys2
Amazon：https://us.arccaptain.com/MadGingerCu...

Use Discount code: Mad Ginger
to save an additional 5% at checkout!!

Hit that SUBSCRIBE BUTTON!!

Support the channel!!! Here are some of our favorites from amazon! If you click and/or buy, you support us!
Tipping die set for bead roller https://amzn.to/3QJgSMD
Ratcheting wrench set https://amzn.to/3J0MGXL
Ospho Rust Converter https://amzn.to/3SZiHnG
Best cold saw ever!! Evolution chop saw https://amzn.to/3ZSJ2pH

#diyprojects #diyrepair #arccaptain #diy #welding #tigwelding #migwelding