How to Replace Lower Ball Joint 2009-2020 Dodge Journey

Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ib-1ASBJ00288

Axle Nut torque correction: 118 ft. lbs.

This video shows you how to install new, quality TRQ ball joints on your 2009-2020 Dodge Journey. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

0:00 Spec Correction at 19:28
19:28 CORRECTION Axle Nut Torque: 118 ft. lbs.

This repair was done on a 2015 Dodge Journey SE 3.6L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey

Tools you will need:
• Impact Screwdriver https://trq.video/oaq-1AXAA00047
• 10mm Wrench https://trq.video/ovB-1AXAA00010
• 13mm Socket https://trq.video/oag9-1AXAA00015
• 15mm Socket https://trq.video/oag9-1AXAA00015
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket https://trq.video/ofy-1AXAA00266
• 32mm Socket https://trq.video/oaR-1AAST00003
• Brake Caliper Hanger https://trq.video/odX-1AXAA00439
• Pickle Fork
• Lug Wrench
• 1/2 Inch Impact Gun https://trq.video/ogM-1AXAA00252
• Air Chisel
• Torque Wrench https://trq.video/oQa-1AXAA00044
• Gloves https://trq.video/okT-1AXSS00048
• Safety Glasses
• 10mm Hex Socket
• Center Punch https://trq.video/ofr-1AXAA00055
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Dodge Journey 2009-2020 1st Generation:    • Dodge Journey 2009-2020 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.