solution for the error SC-362_03 reported by the Ricoh MP C2011 copier after replacing the developer

Have you encountered the error code "SC-362_03" reported by your copier after changing the develper? If your copier also has such an error report, you might as well come and learn together how to solve this problem!#chips #jyd #ricoh
For more information about chip installation issues, visit:
WWW.jydchips.com
1. Chip installation demonstration guide
2. Chip version selection guide
3. Analysis of chip common problems
4. Analysis of chip consumables page

More information, welcome to visit our website and contact us!
Hello everyone, today let's learn about
when using Ricoh MP C2011 copier
the solution of machine reports the error code "“SC-362_03"
and the reason of machine reports the error code "“SC-362_03"
Basically the developer was not initialized after replacing the developer
then such an error occur
The suffix "03" means magenta color, and the code number can be compared as shown in the figure
"SC-362_01" suffix for black issues
"02" stands for cyan "03" stands for magenta "04" stands for yellow
Let's try to initialize the developer first.
Let's see if the problem been solved, the method is as follows:
First, enter the "maintenance mode"
Press the "Reset" button on the machine operation panel, then press "806182"
Press and hold the "C" key for 5 seconds to enter the "maintenance mode" interface
After entering the "Maintenance Mode" interface, click to select "system SP"
Enter the "SP mode" interface and press the key again on the operation panel to enter "3030 #"
There are 6 options on the right side
1 stands for "all" 2 stands for "color" 3 stands for "K"
4 stands for "C" 5 stands for "M" 6 stands for "Y"
Generally choose the suffix 1 "all codes" to execute all
Click "EXECUTE" after execution is complete
A dialog box will pop up displaying 'Completed', indicating that the execution is complete
Click "Exit" to exit
Finally, we shut down and restart
Try printing a test page again to see if there is no error code prompt
Printed successfully. The machine shows OK
Now this machine problem has been solved
If your problem is not resolved
then we need to remove the drum unit to check the developer
Or replace the "TD sensor" to solve this problem
Welcome everyone to leave a comment on the website
Printer chip related problems to ask Jinyinda
We will actively help you answer!