How to Replace Front CV Axle Shaft 2009-2015 Honda Pilot

Описание к видео How to Replace Front CV Axle Shaft 2009-2015 Honda Pilot

Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ia/1AACV00398

This video shows you how to install a new Front CV Axle Shaft in your 2009-2015 Honda Pilot. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/tbdS/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/tbdS/1AXAA00013
• Pry Bar http://1aau.to/tGI/1AXAA00020
• 10mm Wrench http://1aau.to/tMN/1AXAA00010
• 24mm Wrench
• 10mm Socket http://1aau.to/taTU/1AXAA00017
• 17mm Socket http://1aau.to/tbuP/1AXAA00015
• 19mm Socket http://1aau.to/t8K/1AXAA00043
• 22mm Socket http://1aau.to/tgX/1AXAA00266
• 24mm Socket
• 35mm Socket http://1aau.to/t7/1AAST00005
• Brake Caliper Hanger http://1aau.to/tfS/1AXAA00084
• 1/2 Inch Breaker Bar http://1aau.to/tkj/1AXAA00078
• Ratchet http://1aau.to/ta2e/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/tafV/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/twT/1AXSS00048
• Liquid Thread Locker
• Safety Glasses http://1aau.to/trk/1AXAA00343
• Sandpaper
• Hammer http://1aau.to/tJB/1AXAA00091
• Punch
• Wire Brush http://1aau.to/toH/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке