Diy Flow Through Worm Compost Bin

#wormcompost

I got this idea from another channel Greenshortzdiy but I changed it up a bit.

I made a flow through worm compost bin buying minimal materials. I was tired of buying fertilizer so I decided to make my own and decrease my garbage in the process. Materials you'll need:
2x3 wood
4pcs 30in long as the legs
4pcs 15in long
4pcs 10in long
Roofing screws
drill bit for pre-drilling holes
3 1/2in screws
handsaw and drill
spade drill bit the same size as metal/pvc
small thin metal rods or pvc pipe
For these flow through worm bins, the worm castings are harvested from the bottom so that is where the metal pipes come in handy. I'll be drilling screws into the metal at a later time towards the end. The lip of the trash can would get cut off. I made a few mistakes but it's ok I was learning. Hope you enjoy
~~~~~~~~~~~~~~~~~~~~~~
Follow me on Facebook www.facebook.com/theadhdgardener
Follow me on Instagram www.instagram.com/theadhdgardener