Скачать или смотреть Oberon Clutch Slave Cylinder Fitting - KTM LC8 990

A headcam video of me fitting an Oberon slave to a KTM 990 Adventure in real time - ~20min job including bleeding - This is the same part and process for a KTM 950, 990, 1050, 1090, 1190, 1290 etc.

Part number is CLU-0121 - You can buy one here https://ebay.us/tUSQAd

This AdvRider guide by a member called Boatman is excellent both for fitting and successful first time bleeding:

http://advrider.com/index.php?threads...

My symptoms prior to fitting were a slight crunch feeling through the gear lever when changing gear when warm. Using clutchless changes it was fine. All clutch discs were checked and pressure plate torqued to 10nm. On removal of the old slave some brown watery stuff came out so I purchased and fitted the Oberon. In the end the main thing that helped was a oil service, new chain and sprockets.

I have adding some titles to the footage incase my accent or mumbling doesn't come across very well. Hopefully this helps another biker as it was quite hard to find a good guide/instructions on how to properly fit and bleed the new slave.