Booster for the internal fan in the Playstation 3 PS3 - Lowers Core Temp by 70%

http://www.spitfiremods.com/fan-mod-s...
THIS IS THE MOST IMPORTANT MOD YOU CAN GET FOR THE PS3.
If you know how the Playstation 3 is designed, you know that no matter what fan you connect to the outside of your PS3, it will not lower the temperature one bit. This is because the GPU is under a heat spreader, with is under the heat sink, which is under a copper duct system, which then gets exposed to the internal fan of the PS3, which is under the fan shroud, which is attached to the mainboard housing. What this means is no outside air can get to the GPU, BUT on the other hand, the internal fan is directly blowing into the duct that holds the heatsink metal to cool the chip. Imagine if you increased that fans voltage by say 70% in addition to what the PS3 tells it to run. What this means is at idle your fan will blow harder. When the PS3 call for additional cooling - your fan will increase but will also be multiplied an additional 70%. This means your unit will most likely never call for extra cooling because no matter how hard your using it, it is already cooling an extra 70%. This means less heat - and that means much longer life. So if you want your new unit to last 100% longer - or if you just had yours repaired and you want to get another 100% of life out of it, install this mod now. Probably the most important mod you can buy for your PS3.