3D Scan Design and Print Series Part 2 | Beginners Guide to Mesh Editing |

In this video we are starting part 2 of a new series looking at the entire process of scanning to part design using a Revopoint Mini2 3D scanner.

We are going to walk through the processing of a mesh so we have a clean starting point when moving into CAD.

In Part 2 we will learn the tools in RevoScan5 to manually clean up and convert captured scan data into a high quality mesh for use in CAD. We will look at common tools and explain what is going on and how we should work through from the Raw scan data to the finished result.

Remember that we are a Revopoint affiliate and we have worked out a deal to provide some discounts when purchasing a MIRACO, INSPIRE, or MINI2. Below you will find affiliate links with the discount codes applied for each of those scanners as well as the codes themselves if you would like to manually enter them. The discount will vary at Revopoint's discretion based on their current promotions.

Miraco https://shrsl.com/4hjcs
LEADREVO7OFF

Inspire https://shrsl.com/4hjcq
LEADREVO17OFF

Mini2 https://shrsl.com/4hjco
LEADREVO100

In Part 3 we will dive into Fusion and design a new transmission cover for the RC10 truck using our scan data as a template. It is a good workflow using critical features while exploring unique designs. We will print the part, test fit, and conclude the project.