Скачать или смотреть Dodge Journey - Manifold Absolute Pressure Sensor (MAP Sensor) Replacement (2011 - 2020)

Step-by-step guide on how to change / remove / replace MAP sensor on Dodge Journey SUV. There is a bunch of engine codes associated with faulty MAP sensor. Usual symptoms are lean or rich air-fuel ratio and check engine light ON ( 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | SE | CVP | AMP | SXT | LIMITED | CREW | VALUE PACKAGE | EXPRESS ).

MAP SENSOR Part #: 05149174AB

Support the channel and get extra perks as a Channel Member:
   / @quitealright  

MAP sensor is very easy accessible. It is on the top of the engine just under the engine cover. Remove the cover by pulling it straight up. Then disconnect the MAP sensor and rotate it to the right side. Pull it straight out. Install new sensor and turn it back into its original position. Plug it in and you are done. As easy as that.

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.