TIE Pilot Helmet Build Part 1- RS Prop Masters

Part 1 of the real time build of the RS Prop Masters TIE Pilot Helmet.

For any enquires, email [email protected]

For media enquires, email [email protected]


Follow us;

Web - https://www.rspropmasters.com

YouTube -    / rspropmasterstv  

Facebook -   / rspropmasters  

Instagram -   / rspropmasters  

X -   / rspropmasters  

Podcast - Apple - http://bit.ly/3ZkHsg9

Spotify - http://bit.ly/3YTAOxm

Amazon - https://amzn.to/3xKQbwc

#kingoftroopers #rspropmasters #


_________________________________________

0:00:00 Intro.

0:02:15 Trimming the two hemispheres.

0:06:34 Joining the two hemispheres.

0:22:15 The Back end is fixed in place.

0:23:15 Fitting the front tab.

0:28:45 Fitting the middle tab.

0:30:51 Prep the cover strip & fixing at the bottom.

0:37:57 Secure rest of cover strip with tape.

0:38:31 Pay attention to the back quarter.

0:39:10 Plastic weld inside of cover strip at the base.

0:41:11 Move the magnets round.

0:43:35 Plastic weld the middle.

0:44:48 Trim excess from front of cover strip.

0:45:03 Move the magnets to nearer the front.

0:45:44 Plastic weld the front of the cover strip.

0:46:58 Move the magnets to the front.

0:47:26 Final plastic weld on cover strip.

0:48:27 No sanding…so far!

0:49:26 One last bit of plastic weld on the cover strip.

0:51:37 Summary so far…

0:52:15 Removing the magnets and tape.

0:54:26 One more trim.

0:56:07 A quick bit of dremeling.

1:02:06 Recap and what is next?