Скачать или смотреть 3.22 Describe and optimize EIGRP metrics - CCNP ROUTE Exam 300-101 v2.0

Took a look break then got right back in with EIGRP Metrics.


Notes:
The metrics are put into a formula and are represented by K-values

*Bandwidth(K1)-This is a static value that can be changed but it doesn’t really change the actual bandwidth of the interface, it's just used to influence routing protocols like EIGRP.
*Load(K2)- (txload and rx load) Loading will show you how busy the interface is based on the packet rate and the bandwidth on the interface.
*Delay(K3)- Delay reflects the time it will take for packets to cross the link
*Reliability(K4)- Reliability at 255/255 is 100%. This means that you don’t have issues on the physical or data-link layer. If you are having issues this value will decrease
*MTU(K5)- Maximum Transmission Unit is being exchanged between EIGRP neighbors but not used for the metric calculation

Corrections:
At 4:15 that is actually output for show ip protocols
At 16:07 I meant one hundred thousand kilobits per second.

References:



Duan Lightfoot’s Lab Everyday Shirts
http://a.co/d/6xf1kE1


#labeveryday #ciscoccna #ciscoacibasics #cisconetworklearning #cisco #ccna #ccent #creatorsforchange #STEM #womeninstem #womenempowerment #womenentreprenuers #womenentreprenuers