Acura MDX Front Brake Pads & Rotors Replacement

The video will show you step-by-step how to replace the front brake pads with resurfaced rotors on a 2016 Acura MDX. The pads were worn down to 3 mm which is the minimum from which pad replacement is recommended. The replacement pads used with this brake job were Centrix PQ Pro (advertised to address issues related to brake fade, weak braking response, and excessive noise). If OEM pads are desired, the manufacturer is Akibono. Anti-rattle abutment clips came with the brake pad hardware kit and the original clips should be replaced since studies have show they normally loose their spring tension in as little as 35,000 to 45,000 miles. Caliper pins were lubricated with brake grease to provide even brake pad wear by allowing the caliper to "float". The new pads were coated with BG Stop Squeal for eliminating or preventing brake noise by infusing the brake pad with ingredients that reduce sticking between the pad and rotor. With Stop Squeal, when pressure is applied, the vibrations are significantly reduced, thus brake noise is stopped.

If you'd like to make a donation to the channel, please follow the link below: https://paypal.me/HardlyMoving?locale...

Parts and Specialty Tools:

Akebono ACT1280 ProACT Ultra-Premium Ceramic Brake Pad Set:
https://amzn.to/2upK53N

CRC Brake & Caliper Grease:
https://amzn.to/2u3su1g

Anti Seize Lubricant:
https://amzn.to/2u8mhkS

Brake Cleaner Spray:
https://amzn.to/2T66FIl

BG Stop Squeal:
https://amzn.to/2WqWEYD

Disc Brake Pad Installation Spreader Caliper Piston Spreader Tool:
https://amzn.to/2XZOFD8

OTC 3/8" Impact Driver
https://amzn.to/2UMacgX

As an Amazon associate, I earn from qualifying purchases. Thank you for your support!

Please Subscribe: https://goo.gl/x6fySQ