How to Replace Injectors and Cups on a Volvo D13 Part 2/2

For more info about us and contact info visit http://Cardinaltruckservice.com

How to Replace Injectors and Cups on a Volvo D13 Part 2/2

Don't forget that your injectors need to be programmed after installation. A dealer or a local shop will be able to do it. You need to write down the numbers or take picture from each injector to give to programmer. each injector has it's own number so keep the numbers in order.


tools:

14mm socket
13mm socket
18mm socket
injector cup install tool(part number in video)
tools for injector tool
adjustable wrench
24mm wrench
high pressure lube
injector for cup sealer(part number in video)

torque wrench

torque specs
injector hold down 60ft lb
Rocker arms : 44ft lb large bolt and smaller rear bolt on each pair. 20ft lb+120 degree smaller front bolts. loosen rear bolts after torqing front and do 20+120 on those also. 44ft lb+120 degreesfor larger bolt (watch video for more detail)

let me know how I'm doing by dropping a comment below

Subscribe for more videos

http://Cardinaltruckservice.com