Hello World Ultra96! Build the base project on the Ultra96 with a Zynq Processor.

In this video we build the base Hello World project on the Ultra96 FPGA board. From implementing the processor IP through downloading the board files and fixing issues. This project is a great way to learn the necessary steps to program the Ultra96 with Zynq UltraScale+ MPSoC. The steps shown here are used in any project that implements PS and PL and will stand as a good starting place for more intricate designs! Below you will fin the links mentioned in the video as well as commands and directories. Have a great day and don't forget to Love Well!

Tutorial Files
http://ultra96.org/support/design/241...

Board Files:
https://github.com/Avnet/bdf

Install fix files on linux:
sudo apt-get install make
sudo apt-get install build-essential
sudo apt-get install lib32stdc++6

The driver install file can be found here:
/tools/Xilinx/Vivado/2018.3/data/xicom/cable_drivers/lin64/install_script/install_drivers
From this directory run this command:
sudo ./install_drivers

This linux command was also used to enable UART communications:
sudo adduser $USER dialout

  / joshuamacfie