DIY 3D-PRINTED 7-SPEED H-SHIFTER MOD FOR PC | SIMRACING

Thanks for watching, below is everything you will need to make your own h-shifter.

Check all my projects on my website:
https://www.projectnextrace.com/h-shi...

Instagram:
  / projectnextrace  

Facebook:
  / projectnextrace-105831111270530  

Files for 3D Printing and every file you need for this project:
https://gum.co/SQmQB

Required parts:
-8x Microswitch https://ali.ski/OeA0K
-USB Joystick Board https://ali.ski/-bp4zs
-6x M3x18 screws https://ali.ski/54h-s7
-10x M3x10 screws https://ali.ski/54h-s7
-16x M3 nuts https://ali.ski/gA85S
-3x M5x35 screws https://ali.ski/54h-s7
-2x M5 nuts https://ali.ski/gA85S

If you want me to make some project for you or buy already made you can contact me here: [email protected]