Скачать или смотреть Cutting the Puzzle Boxes

In this video I try to outline how you can make some of the puzzle boxes using a mitre saw (or tablesaw sled for greater safety... mentioned but not shown).
Unfortunately I started to make the box for a "Fritz Flop" puzzle, but used the "Tutu" puzzle template, discovered near the end of the video.
Nevertheless the procedure is basically the same using templates to set up the stop blocks for the mitre saw. The templates were cut on the laser, however, setup blocks or a ruler/tape measure could be used.

Measurements and PDFs can be made available on request in the comments.
Anyone interested and into SketchUp, the models can be downloaded from the 3DW at,
https://3dwarehouse.sketchup.com/mode...
https://3dwarehouse.sketchup.com/mode...
https://3dwarehouse.sketchup.com/mode...

3:17 Using my laser cut "box cutting templates".