Скачать или смотреть VALPRO CONNECTING THE “UNIVERSAL SPOUT” TO A CLASSIC LINE FUEL CAN

https://instructions.valpro.lv/en/ins...

1.Place the fuel can on a flat, stable surface.
2.Turn the locking pin and pull it out of the lever as far as it will go.
3.Lift the lever until the arms are fully released from the holder.
4.By pulling the lever, lift the lid up to open the neck opening.
5.Lock the lid in place by lowering the lid hinge down.
6.Place the fuel spout so it completely covers the neck opening of the fuel can.
7.Move the arms of the lever into the cavities of the holder and push the lever of the spout down as far as it will go.

WARNINGS AND RECOMMENDATIONS ON FUEL CANS
CAUTION!
Fuel can be UNDER PRESSURE and there may be a fuel SPILLAGE! At heightened fuel temperatures (above 50 °C) in a closed fuel can, as well as at high altitudes (300+ metres above sea level), pressure in the fuel can may increase. Rapid opening of the fuel can in such conditions could cause a fuel spillage.

Open the fuel can slowly and carefully.

Do not fill the fuel can more than its nominal capacity.

Do not store the fuel can in heat or in direct sunlight. Do not store the fuel can in wet places or in the rain.

Fuel and its vapours are highly flammable – do not smoke or use an open flame when using a fuel can.

Always follow the manufacturer’s instructions when filling units, engines, etc. Do not fill hot and/or running units!

Keep the fuel can out of the reach of children and in a well-ventilated area.

RECOMMENDATIONS
The fuel cans are painted with a special powder paint with high chemical resistance. CAUTION! If the fuel can is stored outdoors, the paint (coating) may lose some of its original appearance (it can fade) within 3-9 months. Even if the coating loses part of its original appearance, its ability to protect the metal will continue if the paint remains intact (if it is not mechanically damaged).

The fuel may contain foreign matter and debris. Always use filter strainers when refuelling. VALPRO “Universal Spout” and “Flexi Spout” fuel spouts have built-in filter strainers that intercept foreign matter and debris. We recommend only using fuel spouts made by SIA VALPRO