Conduit Bending: Parallel Kicks Pt. 2

Please consider Supporting the channel by sharing it with your friends and co-workers.

Conduit Bending: Parallel Kicks Part 1 Link below:
   • Conduit Bending: Parallel Kicks Part 1  

In this video I will be showing you how to layout and bend Parallel Kicks. I mainly just go through the steps I don't go into too much detail about the formulas because that was thoroughly explain in part 1 already. This video is basically a real time example of bending parallel kicks with a hand bender using 3/4" EMT. I'm looking forward to doing the last part of this mini series which will be an example of parallel kicks with a hydraulic and or electric bender.
In this example I am bending a set of 30 degree parallel kicks. Conduit #1 is bent to 6" kick and #2 is bent to an 8" kick. The multiplier is 2 for a 30 degree kick. Also when placing your mark on the conduit it should be measured from the back of the 90 degree stub and bent with the 30 degree center mark on your bender, wether it's a hand bender or hydraulic bender makes no difference it's the same process.
Reminder:
Don't forget to keep the 90 degree stub parallel to the floor and level before bending or the conduit will get dogged, plainly it won't be straight. Also keep it level when you are checking to see if you have the right measurement for your kick.
Please Donate so I could continue to purchase more conduit and supplies to make more video's:
Paypal.me/melrub480v
Should you have any questions at all you can contact me or follow me on:
facebook - HolmzLaw (best contact)
Instagram - HolmzLaw
Twitter - Holmzlaw@Livewire480V
Email - [email protected] (2nd best)

Check out the rest of my playlists:

How to Assemble and Bend w/ Hydraulic and electric benders
   • Greenlee Mobile & Table bender Series  

Advanced Conduit Bending Stratgies: This Playlist is more like an Advanced Bending Course. The video are pretty long and very detailed video's
   • Greenlee Mobile & Table bender Series  

Conduit Bending Tips and Tricks:
   • Conduit Bending  

Tool Unboxing and Reviews:
   • Tool Unboxings  

Electrical Code Calculations: This playlist is new and I currently only have one video. Check back in the near future for more video's
   • Tool Unboxings  
#holmzlaw #parallelkicks #conduitology