How to replace the F-Core on the Camouflet Inductor

Visit the Camouflet website for more details - https://camouflet.com/
Make sure to like the video and subscribe to our channel. Thanks for your support!

Order your F-Core Replacement Kit here - https://camouflet.com/products/f-core...

How to replace the F-Core:

1 • Remove Chipped F-Core. Use a twisting motion while gently gripping the F-Core with Pliers.
2 • Install The New F-Core.
3 • Install Direction is Important. Side with the smooth chamfer goes up!
4 • Silicone New Core In Place. Put a dab of the provided Silicone onto cut side of F-Core.
5 • Insert the F-Core into the device . Careful to not make a mess with the silicone on the top of ceramic surface.
6 • Protruding Amount? The amount the F-Core Protrudes will vary. This is nothing to worry about.
7 • Carefully Align the F-Core. Let the core bottom out. Then carefully align it so it sits vertically and not at an angle.
8 • Let the Silicone Cure. Allow 1-2 hours for initial set. Full strength 24 hours.

#Camouflet #Inductor #FCore #Replacement #howto #induction #inductionheater #inductionheating #tech #technology #repair