Скачать или смотреть Trail Tech Voyager Pro - Boot Loop!!! - Started happening after update VPS4B9.V32209A.swu 1-7-2022

UPDATE: I removed all GeoPDF maps I had installed (10-15), only totalling 30mb, and this returned the problem to it's usable state, but it still reboots 2-5 times! I loaded one back in, and everything is working. So, pay attention to how many GeoPDF maps you have loaded at the same time. Apparently, they all load at power on, even if your not in the area they are being used, maybe?

The manual Software Restore did not fix this, only thing that did fix it was rolling back to previous non- GeoPDF versions, then it would run fine. Updating back to current GeoPDF brought the problem right back. I left it in this mode for 45min+, and it finally did start working, at that point I went in and cleared all custom maps. This was the only way to fix it. While this was happening, I still had about 830mb free space, so I dont think it is a space issue. Perhaps an internal RAM issue, maybe, from having 10-15 GeoPDF maps loaded at the same time.

This started happening immediately after the lastest update as of 5-2022, but it would only do it once or twice then startup normally. Today, I turn it on, and it keeps doing it, forever!

Screens work normally until it restarts, but there's nothing I can do to get it to stay on.

Also happens when plugged in to 13v.