Скачать или смотреть 1950's Tonka Stock Hauler Restoration

Welcome to my channel! In this video I restore a vintage 1950s Tonka Livestock Hauler toy truck that I purchased on eBay for $116.60. This classic Tonka toy restoration turned out to be a neat project, and the transformation from rusty and worn to fully restored was satisfying.

If you enjoy toy restorations, vintage Tonka trucks, sandblasting, welding, metal fabrication, and full restoration projects, you’re going to enjoy this one.

Full Vintage Tonka Restoration Process

As shown in the video, I completely disassemble the Tonka toy truck and remove years of paint, rust, and grime using sandblasting. During the teardown, I discovered that the truck originally started life as a Tonka fire truck, which explains the holes for the beacon light and siren.

To restore it as a livestock hauler, we welded the holes closed, using a brass fitting as backing while welding.

Bodywork and Metal Repair

The trailer needed quite a bit of work. The top of the trailer was caved in, so I repaired it by:

Stretching the metal

Hammer and dolly work

Sanding and smoothing the surface

To fix small dents, pitting, and imperfections, I used JB Weld to fill and smooth the damaged areas before finishing.

One of the running boards was severely rusted with holes all the way through, so I fabricated a custom replacement running board from sheet metal and welded it into place.

Trailer Floor Replacement

The original trailer floor was replaced with new wood. I then:

Stained the wood

Applied two coats of satin clear coat for durability and protection

New Parts and Final Assembly

Several parts were replaced during the restoration, including:

• Tires
• Hubcaps
• Lights
• Landing gear
• Decals
• Hardware

The axles were replaced with plated steel rod, and the entire Tonka truck was powder coated for a durable, long-lasting finish.

The final result of this 1950s Tonka Livestock Hauler toy truck looks almost new again.

But What Do You Think?

I think the finished truck turned out pretty neat, but I’d love to hear what you think. Let me know in the comments!

If you enjoy vintage toy restorations, Tonka truck restorations, and satisfying restoration projects, consider subscribing for more videos like this.

Thanks for watching and supporting the channel! If you have any questions about the restoration process, feel free to leave them in the comments—I try my best to read and respond to as many as I can. 🙂
Have a blessed day,
Kev.


Products used or similar in video:

Mini Lathe Chuck for Drill. https://amzn.to/3JROrLc
Vise Jaw Pads. https://amzn.to/3WLdUsD
Cold Blue Solution. https://amzn.to/3LvN3OP
PB Blaster. https://amzn.to/3Fyp4bs
JB Weld. https://amzn.to/3YF1kwe
Powder Coating System. https://amzn.to/4jIrsyI
Milwaukee Screw Driver set. https://amzn.to/3Eyaiol
Makita 18v Light. https://amzn.to/3laSKoz
Makita Multitool. https://amzn.to/4jIR7Hn
Irwin Vise Grip Needle Nose Pliers. https://amzn.to/3DAfIv0
Evaporust. https://amzn.to/4cwaEXV
Drill Scrub Brush. https://amzn.to/4cFodpp
Perma Blue - On Amazon
Camera and filming gear;

Main Camera. https://amzn.to/4jfd4xL
Camera Mic. https://amzn.to/43Wqvy3
Wireless Mic.https://amzn.to/4ld9kPc


Disclaimer. All links above are affiliate links. I make a small commission if links are used.

Other Restoration Videos:
Old Metal Shear Pat. 1912 Restoration.   • 1912 Hand Crank Metal Cutter Restoration -...  
Tonka Fire Truck Restoration.    • 1950s Tonka Fire Truck Restoration. (It sp...  
Structo Concrete Truck Restoration.    • 1950s Structo Concrete Truck Restoration  
Adams Traveloader Toy.    • Rare 1954 Traveloader Restoration- Nylint ...  
Snap-on Bench Vise Restoration.    • 1750 Snap-on Rusted and Seized Vise Restor...  
Snap-on Jack Restoration.    • Leaky Rusted Vintage Floor Jack Restoratio...  
1900s Grease Gun Restoration.    • 1900s Grease Gun Restoration  
Ingersoll Rand Impact Restoration.    • Restoration of a 1 Dollar Air Impact (Inge...  
Craftsman Bench Grinder Restoration.    • Awesome Restoration of Rusted Grinder  
Snap-on Ratchet Restoration.    • Mirror Finish. Rusty Snap-on Ratchet Resto...  
Milwaukee M12 Impact Restoration.    • Milwaukee M12 with Bad Motor Restoration /...  
Vise Restoration.    • Busted Vise Restoration  


Disclaimer. All links above are affiliate links. I make a small commission if links are used.
------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#DIY
#Vintage
#vintage restoration
#relaxing
#relax