Скачать или смотреть Simple Facial Recognition project with Raspberry Pi

This is a very short & simple project/tutorial about Facial Recognition with just a Raspberry Pi and camera.

The commands for installing dependencies & cloning GitHub repo (in the right order)

sudo apt install cmake build-essential pkg-config git
sudo apt install libjpeg-dev libtiff-dev libjasper-dev libpng-dev libwebp-dev libopenexr-dev
sudo apt install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev libxvidcore-dev libx264-dev libdc1394-22-dev libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev
sudo apt install libgtk-3-dev libqtgui4 libqtwebkit4 libqt4-test python3-pyqt5
sudo apt install libatlas-base-dev liblapacke-dev gfortran
sudo apt install libhdf5-dev libhdf5-103
sudo apt install python3-dev python3-pip python3-numpy

git clone https://github.com/opencv/opencv.git
git clone https://github.com/opencv/opencv_cont...
mkdir ~/opencv/build
cd ~/opencv/build
cmake -D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=/usr/local \
-D OPENCV_EXTRA_MODULES_PATH=~/opencv_contrib/modules \
-D ENABLE_NEON=ON \
-D ENABLE_VFPV3=ON \
-D BUILD_TESTS=OFF \
-D INSTALL_PYTHON_EXAMPLES=OFF \
-D OPENCV_ENABLE_NONFREE=ON \
-D CMAKE_SHARED_LINKER_FLAGS=-latomic \
-D BUILD_EXAMPLES=OFF ..
make -j$(nproc)
sudo make install
sudo ldconfig

Note that there is no penalty for typing the wrong command, just retype the right command and press "Enter" if that happens.

This cannot be done without the article from PiMyLifeUp:
https://pimylifeup.com/raspberry-pi-o...

Not sponsored but I thought would be helpful:
Here are my gears

Canon EOS M200 & 15-45mm EM F Lense: shorturl.at/lDLVX

Favorite Portable Light: shorturl.at/lmzW3

Studio Light: shorturl.at/hnsC0

Blue Yeti X Mic: shorturl.at/fpGJX