Скачать или смотреть 💎 How To Format And Scan Superbox Decoder

How To Format And Scan Superbox Decoder

To format and scan channels on a SuperBox decoder, you typically need to access the settings menu using the remote control. Here's a general guide on how to do it:

1. *Power On the Decoder:*
Make sure your SuperBox decoder is powered on and connected to your TV or monitor.

2. *Access the Settings Menu:*
Using the remote control, navigate to the settings menu. This is usually done by pressing the "Menu" button or a similar button labeled with a gear or settings icon.

3. *Navigate to Channel Setup:*
Once you're in the settings menu, navigate to the section related to channel setup or channel management. This might be labeled as "Channel Setup," "Channel Search," "Installation," or something similar.

4. *Format the Decoder (Optional):*
Some SuperBox decoders may have an option to format or reset the device to its factory settings. If you want to perform a complete reset, look for an option like "Factory Reset," "Format," or "Initialize." Keep in mind that formatting the decoder will erase all saved settings and channels, so proceed with caution.

5. *Scan for Channels:*
After accessing the channel setup menu, look for an option to scan for channels. This might be labeled as "Channel Search," "Auto Scan," "Auto Tune," or something similar.
Select the appropriate scanning method based on your location and the type of channels you want to scan for (terrestrial, satellite, cable, etc.).
Start the channel scan and allow the decoder to search for available channels. This process may take several minutes, depending on the speed of your decoder and the number of channels available in your area.

6. *Save Channels (If Necessary):*
Once the channel scan is complete, the decoder should display a list of detected channels. You may have the option to save all channels found or select specific channels to save.
Follow the on-screen instructions to save the scanned channels to your decoder's memory.

7. *Exit the Settings Menu:*
After completing the channel scan and saving channels (if necessary), you can exit the settings menu by pressing the "Exit" or "Back" button on the remote control. This will return you to the normal viewing interface.

8. *Verify Channel Scan Results:*
Navigate through the channels to verify that the scan was successful and that you can access all the channels you want to watch.

If you encounter any difficulties during the process or if specific instructions are required for your SuperBox decoder model, refer to the user manual provided with your decoder or contact the manufacturer's customer support for assistance.



__________________________________
LINKS


WEBSITE:

https://www.pbteck.com






INSTAGRAM;


  / pbtecknology  


FACEBOOK;


  / pbtecknology  


TWITTER


  / pbtecknology  







TELEGRAM:


https://t.me/pbtecknology








#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire