How To Take An Accurate Tire Pressure Reading Using The TireTek Premium Tire Gauge

Get the TireTek Premium Tire Pressure Gauge here: http://tire-tek.com/products/premium-...
...or check it out on Amazon here: http://www.amazon.com/TireTek-Premium...

Firstly you should always check your vehicle's tire pressure before driving when the tires are cold, as taking a reading on warm tires will result in both inaccurate and inconsistent tire pressure measurements.

Start by rotating the 45º chuck head on your Premium Tire Pressure Gauge to match the angle of the tire valve.

When using a 45º rotating chuck it is important not to simply push the gauge onto the valve from the base like you would with a standard straight chuck, as this can result in air loss.

Instead locate your thumb behind the head of the tire gauge chuck and push briefly, yet firmly, onto your vehicle's tire valve to get a perfect seal every time.

This can be done using either a one-handed method, or the preferred two-handed approach, as this offers greater control.

Either read the tire pressure while the gauge is still on the valve, or if for example there is bad light, remove the gauge from the tire valve to view the pressure reading held on the display.

Finally remember to press the bleed button on the side of the tire gauge to release the pressure and 'zero' it back.

For more 'how to' videos, downloadable user guides, FAQs, tips and troubleshooting advice on the full TireTek range, visit: http://support.tire-tek.com

Join our TireTek VIP Members Club - grab new product launch offers, get special VIP member discounts & win free stuff!
Join for FREE here: http://tire-tek.com/vip

Connect with us at:
http://tire-tek.com
  / tiretekautomotive  
   / tire-tek  
https://plus.google.com/+Tire-tek