Mcb Trip Indicator Connection

MCB Trip Indicator Connection:
Trip Indicator:
The trip indicator typically consists of an LED that lights up when the MCB trips due to an overload or short circuit.
The indicator is usually connected in parallel with the MCB contacts so that it receives power when the MCB trips.
Connect one terminal of the indicator to the load side of the MCB (after the MCB contacts) and the other terminal to the neutral or ground, depending on the indicator's requirements.
MCB Stop with Push Button:
Stop Button:
The stop button is used to manually trip the MCB and cut off power to the circuit.
Connect one terminal of the stop button to the shunt trip terminal on the MCB and the other terminal to the neutral or ground, depending on the MCB's requirements.
Shunt Coil Connection with MCB:
Shunt Coil:
The shunt coil is used for remote operation of the MCB, allowing it to be tripped remotely.
Connect one terminal of the shunt coil to the shunt trip terminal on the MCB and the other terminal to a control circuit that can provide the signal to trip the MCB.
More info about CNC Electric's MCBs: https://www.cncele.com/mcb-terminal-e...
#cncelectric #electrician #electricaldevices #electricalwork #electrical #electricalprofessional #electricalequipment #electric #industrialelectrician #mcb #mcbconnection #shuntcoil#mcbaccessories #electricalengineering
SOCIALISE WITH US
*******************************
FACEBOOK: https://bit.ly/3yGHFyL
TikTok: https://bit.ly/3ZU8ZWg
INSTAGRAM: https://bit.ly/42rSmD8
Linkedin: Linkedin: Linkedin:   / cnc-electric1988  
WEBSITE: https://www.cncele.com/