Frontier OS31 Sawmill Trailer Assembly and Pulling Tips

In this episode I am covering the Frontier OS31 (and OS27) Sawmill Trailer package install and setup. In addition, I'll cover how to get it plated (in Michigan) and some pulling tips. As an added note, when wiring the trailer lights you WILL need to extend the ground (white) wire to the frame (I chose the silver rails) and the LED lights white wire also to the frame. Otherwise, you will be fighting to get the lights to work.

UPDATE: I was able to pull this mill over 300 miles to my off grid milling location with no issues. I strapped down the water tank, locked the mill over the axle with bolts and nylock nuts, then strapped the mill with ratchet straps pulling toward the front and another toward the back. Didn't even wiggle loose, although I checked it several times. Top speed? I pulled it up to 70 with not issues but with michigan roads (even the highways) I kept it at about 65. Oh, as a precaution, I did buy a spare tire and brought a 4-way to change things out if needed (because we all know, if you don't have a spare - you'll need it!).

I hope you find this valuable and thanks for watching!

We encourage comments and please like and subscribe to help support the channel!

Respect the Land!

UTV Boondockers treats the campsites and the land with respect and leaves
each location as good or better than it was found. Boondocking is an excellent way to camp and explore so please pick up your trash, put out any fires that you started and leave no trace.

#utvboondocker #polarisgeneral #boondocking