Govee Lights with SIMHUB - Full setup.

STEPS

1. Buy some Razor Lights (must be Razor Chroma compatible!). Check the link for compatibility.
https://desktop.govee.com/razer/devices

Working options...

A) Govee Flow Plus H6056
https://www.amazon.ca/Govee-Assistant...

B) Govee RGBIC Gaming Light Bars H6047
https://www.amazon.ca/Govee-H6047-Con...

2. Download the Govee Home app on your PHONE or TABLET. Set up an account and proceed to connect the lights to the app, and your home Wifi. (You'll need bluetooth enabled on your phone for this I believe).

3. Now download the Govee Home app on to your PC. Open it and you should see you Govee device model under Device List. If it's connected to the same network as your PC.

4. Back on your PHONE in the Govee app, click on the Device name E.g. H6056_6F68. Device Settings - LAN Control - Click it ON.

5. Back on the PC, Install Razer Synapse (Make an account)
https://www.razer.com/ca-en/synapse-3

6. Open Razer Synapse under Modules - Install Chroma Connect and Chroma Studio
Razer Synapse will restart by itself after the install. Now under DASHBOARD, you should see GOVEE as a connected device. Make sure the Govee Home app is also open on your PC.

NOW, to use the Light Bars in Simhub... drum roll ...

7. CLOSE both the Govee Home and Razer Synapse on the PC. (Razer Central can still remain open).

8. Open up Simhub. Turn on the Ambient Lights plugin.
Under Bluetooth/Govee lights, Enable and Add new Govee device. Connect that bitch!

Enjoy.